Official RF Toolkit: Difference between revisions

From Red Faction Wiki
No edit summary
No edit summary
Line 47: Line 47:


One file per line. The pathname must be relative to the directory you run CCrunch from. Note, wildcards are permitted, as shown in the “music” lines above. This feature of CCrunch is designed for massive, automated [[.vpp]] building. If you're only packing a few stray files, it might be better to use one of the other [[RF1_Editing_Main_Page#Red_Faction_Tools|RF Tools]].
One file per line. The pathname must be relative to the directory you run CCrunch from. Note, wildcards are permitted, as shown in the “music” lines above. This feature of CCrunch is designed for massive, automated [[.vpp]] building. If you're only packing a few stray files, it might be better to use one of the other [[RF1_Editing_Main_Page#Red_Faction_Tools|RF Tools]].
[[Category: Red Faction]]
[[Category: RF1 Editing]]


===MakeVBM===
===MakeVBM===
MakeVBM is a standalone command-line utility used to create [[.vbm]] files for use in [[Red Faction|Red Faction 1]]. These are animated or single-frame 2D bitmaps, in a proprietary Volition format. Volition's MakeVBM program is included in the [https://www.factionfiles.com/ff.php?action=file&id=517191 Official RF Toolkit].
'''MakeVBM''' is a standalone command-line utility used to create [[.vbm]] files for use in [[Red Faction|Red Faction 1]]. These are animated or single-frame 2D bitmaps, in a proprietary Volition format. Volition's MakeVBM program is included in the Official RF Toolkit.


In 2020, rafalh released his [[Rafalh RF Tools#MakeVBM Enhanced|own completely rewritten version of MakeVBM]], which adds many enhanced features over the original. This enhanced tool uses the same syntax as the Volition tool, adds additional functionality, and retains all functionality of the original.  
In 2020, rafalh released his [[Rafalh RF Tools#MakeVBM Enhanced|own completely rewritten version of MakeVBM]], which adds many enhanced features over the original. This enhanced tool uses the same syntax as the Volition tool, adds additional functionality, and retains all functionality of the original.  

Revision as of 16:57, 4 November 2020

The Official RF Toolkit is a collection of standalone utilities and 3ds max plugins used to create content for Red Faction. These are some of the same tools used by Volition in the creation of the game.

You can download the Official RF Toolkit here: [Download]

Standalone Utilities

CCrunch

Captain Crunch (CCrunch) is a standalone command-line utility included in the Official RF Toolkit that does three things:

  • converts .v3d files into .v3m files (Static Meshes)
  • converts .vcm files into .v3c files (Skeletal Meshes)
  • creates .vpp packfiles out of regular datafiles

Usage

Static Meshes

Static mesh files exported from 3ds Max via the RF Toolkit Plugins are .v3d files. These need to be converted into .v3m files before Red Faction can load them.

The command-line syntax for this conversion is:

ccrunch.exe FILENAME.v3d

Where FILENAME is the relative path & filename of your .v3d file. If you specify no path, it will assume the same directory you’re running it from. The resulting .v3m file will be placed in the same directory as the source file. The output spew for this process is confusing at best, but if it created the file and you don’t see the word “ERROR” anywhere in the spew, you’re good to go.

Skeletal Meshes

Skeletal meshes are used for characters and first person weapons. They are exported from 3ds Max via the RF Toolkit Plugins are .vcm files. These need to be converted into .v3c files before Red Faction can load them.

The command-line syntax for this conversion is:

ccrunch.exe FILENAME.vcm

Where FILENAME is the relative path & filename of your .vcm file. If you specify no path, it will assume the same directory you’re running it from. The resulting .v3c file will be placed in the same directory as the source file. The output spew for this process is confusing at best, but if it created the file and you don’t see the word “ERROR” anywhere in the spew, you’re good to go.

VPP Packfiles

.vpp packfiles must be used for any data modification in Red Faction PC. This goes for levels, .tbl files, models, textures, everything. If it’s not inside a .vpp file, the game will not recognize it.

Building .vpp packfiles with CCrunch is pretty straightforward. The command-line syntax is like so:

ccrunch.exe <output VPP filename> <input TXT filename>

A text file list of individual files to include in the .vpp must be specified. You can make the .txt file with Notepad, or any other text editor. A sample .txt input file might look like this:

data\effects\lights\LightBeam02.tga
data\maps\skins\enviro_guard_face_b-mip1.tga
data\levels\single\L11S3.rfl
data\levels\single\L12S1.rfl
data\audio\music\ambience\*
data\audio\music\game\*
data\audio\music\menu\*

One file per line. The pathname must be relative to the directory you run CCrunch from. Note, wildcards are permitted, as shown in the “music” lines above. This feature of CCrunch is designed for massive, automated .vpp building. If you're only packing a few stray files, it might be better to use one of the other RF Tools.

MakeVBM

MakeVBM is a standalone command-line utility used to create .vbm files for use in Red Faction 1. These are animated or single-frame 2D bitmaps, in a proprietary Volition format. Volition's MakeVBM program is included in the Official RF Toolkit.

In 2020, rafalh released his own completely rewritten version of MakeVBM, which adds many enhanced features over the original. This enhanced tool uses the same syntax as the Volition tool, adds additional functionality, and retains all functionality of the original.

Key improvements in rafalh's enhanced MakeVBM are:

  • Support for high resolution image files
  • Support for many common image formats as input (.jpg, .png, .dds, etc.), rather than only .tga like the Volition tool

Usage

The source input for MakeVBM is one or more image files, either 24 or 32 bit with alpha, in a supported image file format. A list of supported image file formats is available here.

The first step is to get your image files in one place, and name them correctly. MakeVBM requires sequences to be named like so:

name-0000.tga
name-0001.tga
...
and so on.

“name” can be any prefix you like, but it must be followed by the “-XXXX” ending. Once you have your files together, decide what color format your VBM will use.

While all VBMs use 16 bits of color, that 16 bits can be broken down several ways. The output VBMs can be in one of four color formats. The numbers represent the ARG and B channels (alpha, red, green, and blue).

4444 4 bits for each RGB channel, 4 bits for alpha. Use this format when you want a full, varied alpha channel with semi-transparency.
1555 5 bits of color for the RG and B channels, 1 bit for alpha. Use this when you have alpha, but it’s only the “on/off” variety. Pixels are either totally opaque or totally transparent. Useful largely for interface art.
565 5 bits of alpha for the R and B channels, 6 bits for Green, and zero for alpha. Use this when the image needs no alpha transparency at all.

Next, decide what framerate the animation will need, measured in frames-per-second.

When you’re ready, open a command prompt window, make sure “makevbm.exe” is on your path, and go to the directory where your frames are located. Then type:

makevbm <colormode> <framerate> <prefix>.tga

Where <colormode> is either 4444, 1555, or 565, <framerate> is an integer like 15 or 30, and <prefix> is the first part of your sequence filenames, minus the “-XXXX” suffix.

The Red Faction invulnerability overlay effect is a .vbm using 565 color mode at 8 frames per second. To create that file from its frames, I would type:

makevbm 565 15 pow.tga

This would create “pow.vbm”, which the game can now use.

When everything is run correctly, the output spew looks like this:

MakeVBM Output

FontTool2

FontTool2 is a standalone command-line utility used to convert properly-formatted .tga images into .vf font files for use in Red Faction.

Usage

Basic Usage

In order to create a source .tga, you will need a paint program that supports 32-bit images with an alpha channel (Photoshop, Paint Shop Pro, etc). The first thing to note is that Red Faction uses the ANSI character set, not ASCII. The set coding determines in what order characters appear in the “chart”. Here is a list of ANSI character codes, and their characters:

ANSI Character Codes

Red Faction fonts must start at the first entry, 32, which is the space character. The .vf files that ship with the game include every character from 32 to 126, and also any characters marked in green or violet in the above chart. Green characters are included as-is, while violet are used for special symbols and don’t match the characters shown in the above chart.

An example formatted source file is provided (rfpc-medium.tga) in the Official RF Toolkit. This example includes each character, starting from ANSI 32, through the diacritics characters needed for German and French, ending with ANSI 252. It looks like this:

rfpc-medium.tga: example FontTool2 source file

Note that while there’s a “cell” for every character from 32 to 252, there isn’t a character in every cell. Some are empty, one-pixel wide slots. In your font, you can skip as many characters as you like, but you must include an empty cell for each of them. You can see the basics of how to create a font just by looking at the PSD file. Every character sits in a cell, every cell is made up of a 1-pixel, full green border.

Here are the basic rules for creating the source .tga:

  • Cells must start with ANSI 32 (the space character), but can end on any ANSI cell.
  • You must not skip cells. If you wish to not include a character, you need to include an empty cell for it, at least one pixel wide.
  • The green borders that make up the cells must be one-pixel in width on all sides, and must be full green (0, 255, 0).
  • Rows of cells can be broken anywhere, but at least one black pixel row must seperate each row of cells.
  • All cells must be the same height.
  • Cells can be varying widths, to match the size of each particular character. One black pixel should be included on the right side of each character. This extra space is what determines the default spacing, or “kerning” between that character and the next one.
  • You must have an alpha channel. See “rfpc-medium.tga” for an example of how the alpha channel should be used.
  • Non-black pixels in the alpha channel must not overlap the green border pixels in the RGB channels.

The example .psd, as it appears, is not ready to make a source .tga just yet. The way it’s shown is how it’s most easily edited, however, with layers for the black background, the characters, and the green borders.

Before saving it out as a .tga, copy the characters channel into the alpha channel, and floodfill the characters channel with full white. Since the alpha channel is what determines the actual shape of the characters, the RGB channels should be full intensity white (except the green borders) to make sure the characters are evenly colored. See rfpc-medium.tga for an example of how it should look.

Once you have the .tga saved out (use 32 bits, not 24), you’re ready to run it through FontTool2.

Open a command prompt window and go to your \fonttool2\ directory. Type the following:

fonttool2 FILENAME.tga

Where “source.tga” is the name of the .tga file you saved out. If everything worked, it should spit out a bunch of output, and end with something that looks like this:

FontTool2 output

If you get any sort of error message, something isn’t right with the source .tga. A common cause of errors is non-black alpha pixels underneath the green borders. If this occurs, or if your green borders aren’t connected correctly, it will give you coordinates where the problem is. Once things are straight, you’ll get a source.vf file (named however you named the .tga file). This is what the game actually loads.

Advanced Usage

Once you’ve played with making fonts, you may wish to change the kerning information. Kerning is what determines how far apart one character appears from the next. In proportional fonts like the ones seen in RF, some characters look too far from others unless you modify the kerning data. A good example of this is a T followed by a J. You may want to make the J overlap the T just a little.

Do edit the kerning data on your .vf file, go to your \fonttool2 directory and type:

fonttool2 FILENAME.vf

Where “source.vf” is the name of your .vf file. This will start the interactive kerner in FontTool2. With this you can alter the spacing between any two characters in your font, on a case-by-case basis. Instructions on how to use the interactive kerner should appear onscreen.

MVFReduce

3ds Max Plugins

  • NOTE: All included 3ds Max plugins require version 4.2 or 5.x of 3ds max. They will not work on earlier or later versions.

RFBone

V3DExporter

VFXExporter

VParticle

VBMImporter